❚ 4.2 CLEANING OF THE NOZZLE / TIP REPLACEMENT We recommend cleaning the nozzle and the tip weekly. The e-bidet is provided with one additional tip with 3 holes for a more intense cleaning. This second tip can be used to replace the installed tip. To remove the nozzle or change the tip, follow this steps: 1 2 3 x1 3 s. 4 5 6 A B 7 8 OR B A 1- Press the anal cleaning button on the auxiliary side control for 3 seconds. 2- The lights blink and a beep can be heard (if the silence mode is not activated). 3- The nozzle will come forward without spraying any water. 4- Remove the tip by rotating it in an anti-clockwise direction. 5- Clean the nozzle. 6- Clean the tip. 7- Replace the tip on the nozzle. 8- Once the cleaning is finished, press the Stop button on the remote control or the auxiliary side control. Should you fail to do so, the nozzle will move backwards automatically after 5 minutes. Once inside, it carries out a self-cleaning process. 17