E2.1 Smart Toilets Installation®IN-WASH INSPIRA Back to wall - Rain water or grey water is not suitable to operate this appliance. The Technical information In-Wash Smart Toilet may only be operated with normal drinking water. - The recommended water supply pressure is 150 KPa to 500 KPa. Power Supply 240V / 50Hz. Operate equipment within the recommended water pressure. Power Wattage 1700 W - Water supply temperature must be between 10 - 30ºC. Ensure the IP Rating IPX 4 correct water temperature is maintained. Note: Any electrical work connected on this project must be installed by qualified and licensed personnel, in accordance with AS/NZS 3000 Wiring Rules. - Do not use a water supply hose other than the one provided with this product. Certification - Make sure that this product is correctly earthed to the ground. (If the Watermark AS1172.1 / AS1172.2 product is not earth-connected, there is a risk of electric shock). Certificate No. WMKA02321 - Concerning the requirement of an external Hazard Backflow WELS 4 Star, 4.5/3 litre, Average Flush 3.3 litre Prevention device, consult the manual attached inside the product box. RCM ip Do t r r rin r. 1 Pipes Do not use grey orl rain waer.tertn .Use only potable water. tion 1a Opti 1b Option Option kPa 300 300 500 kPa 300 300 1/” 1 ” Ø1/2” Ø1/2” 2 Electricall lri Optionpi 2a Optiontion 2b 3x 1mm2 L x 01 2 = 30 mm L ØMin: 6 mm ØMaMx: 8,5 mm : 8,5 55 55 55 106 521002521002