❚ 3.2 SETTINGS WITH THE REMOTE CONTROL 3.2.1 SETTING OF TEMPERATURE The water and air functions have a temperature setting. The water temperature has 4 levels: • Room temperature (no led is switched on) • Low temperature aprox. 33ºC (1 led switched on) • Medium temperature aprox. 36ºC (2 leds switched on) • High temperature aprox. 39ºC (3 leds switched on) The air temperature can be adjusted in 4 levels: • Room temperature (no led is switched on) • Low temp (1 led switched on) erature • Medium te mperature (2 leds switched on) • High temp (3 leds switched on) erature By pressing the plus symbol we can obtain a higher temperature and by pressing the minus symbol, a lower temperature. 3.2.2 SETTING OF WATER PRESSURE The cleaning water pressure may be modified obtaining a higher or lower water force in 3 levels. By pressing the plus symbol we can obtain a higher force and by pressing the minus symbol, a lower force. 3.2.3 SETTING OF POSITION The nozzle can be adjusted in 5 positions. By default it starts in a middle position allowing the user to advance two positions and to move backwards two positions. ❚ 3.3 AUXILIARY SIDE CONTROL The auxiliary side control can be used to monitor the main product functions: Anal cleaning and dryer. This auxiliary side control allows the use with medium settings. These settings may not be customised: • Medium temperature • Medium pressure • Middle pos ition The functions may only be activated when the lid is open and the device detects a user. 11